Darshan Singh Mahavidyalaya, Bhewan Keshari Niwada, Bhewan, Kanpur Dehat

N.S.I.TMPAE

Contents

PUBLICATIONS

    1. Singh, S. Maheshwari, S, Pandey, P. C., "Some investigations into the electric discharge machining of hardened tool steel using different electrode materials", Journal of Materials Processing Tech., Elsevier 149/1-3, 2004, pp. 264-269.
    2. Shankar Singh, Sachin Maheshwari, P.C. Pandey and Aloke Dey, ‘Experimental Investigations into Die-sinking Electric Discharge Machining of Hardened AISI 6150 Tool Steel using Different Electrode Materials’ (Paper Ref No.: SC 07/05), Strojnícky Èasopis - Journal of Mechanical Engineering, Slovak, Vol. 56 No. 4, 2005, pp. 197-210.
    3. Shankar Singh and Sachin Maheshwari, “Optimisation of Electric Discharge Machining of Aluminium Matrix Composites (AMCs) using Taguchi DOE Methodology”, International Journal of Manufacturing Research 2007, InderScience Publishers Vol. 2 No. 2, 2007, pp. 138 – 161.
    4. D. Gosain, D. Jyoti, D. Asiwal, S. Singh, S. Maheshwari, S. Agarwal, “Innovations in Powered Mobility Device for Hands Impaired Patients” 'International Journal of Applied Engineering and Research (IJAER), Vol. 2, No. 3, September 2007.
    5. Shankar Singh, Sachin Maheshwari, P. C. Pandey, “Effect of SiC Powder Suspended Dielectric Fluid on the Surface Finish of 6061Al/Al2O3P/20p Composites in Electric Discharge Machining” International Journal of Machining and Machinability of Materials (IJMMM), InderScience Publishers Volume 4, Number 2-3 / 2008, pp. 252 – 274.
    6. Naveeen Beri, S. Maheshwari, C. Sharma, A. Kumar: “Performance Evaluation of Powder Metallurgy Electrode in Electrical Discharge Machining of AISI D2 Steel Using Taguchi Method” International Journal of Mechanical, Industrial and Aerospace Engineering ISSN: 2073-056X, 2:3 2008, pp. 167 – 171
    7. Shankar Singh, Sachin Maheshwari ‘An Experimental Investigation into Abrasive Electrical Discharge Machining (AEDM) of Al2O3 Particulate Reinforced Al-based Metal Matrix Composites’-, Strojnícky Èasopis - Journal of Mechanical Engineering, Slovak, Vol. 57 No. 1, 2006, pp. 13 - 33.
    8. Shankar Singh, Sachin Maheshwari ‘Electrical Discharge Machining (EDM) of Aluminium Metal Matrix Composites Using Powder Suspended Dielectric Fluid’, Ref. SC 10/06) Strojnícky Èasopis - Journal of Mechanical Engineering, Slovak, Vol. 57 No. 5, 2006, pp. 271 – 290.
    9. Naveeen Beri, S. Maheshwari, C. Sharma, A. Kumar: “Parametric Optimization of Electrical Discharge Machining of EN-19 Using Response Surface Methodology”. Strojnícky Èasopis - Journal of Mechanical Engineering, Slovak. Vol. 60 No. 4, 2009, pp. 221 - 236.
    10. Anil Kumar, S.Maheshwari, C.Sharma, Naveen Beri “Parametric optimization of additive mixed electrical discharge machining process based on Taguchi Method” . Strojnícky Èasopis - Journal of Mechanical Engineering, Slovak. Vol. 60 No. 5 -6, 2009, pp. 289 - 304.
    11. Shankar Singh, Sachin Maheshwari, P. C. Pandey, A. Dey, ‘Experimental results and analysis for electrical discharge machining (EDM) of aluminium metal matrix composites with powder-mixed dielectric - the lenth’s method’ International Journal of Manufacturing Technology & Management (IJMTM), Inderscience Publishers Vol. 21 Nos. ½, 2010, pp. 67 - 82.
    12. Naveeen Beri, S. Maheshwari, C. Sharma, A. Kumar: “Technological advancement in electrical discharge machining with powder metallurgy processed electrodes: A review” Journal of Materials and Manufacturing Processes, Taylor & Francis Publishers, Vol. 25, Issue 10, 2010, pp. 1186 – 1197.
    13. Naveeen Beri, S. Maheshwari, C. Sharma, A. Kumar: “Optimisation of electrical discharge machining process with CuW powder metallurgy electrode using grey relation theory”. Accepted for publication in International Journal of Machining and Machinability of Materials (IJMMM), InderScience Publishers. Vol. 9, Nos. 1/2, pp 103–115, 2011
    14. Anil Kumar, S. Maheshwari, C. Sharma, Naveen Beri “A study of multi-objective parametric optimization of silicon abrasive mixed electrical discharge machining of tool steel”. Journal of Materials and Manufacturing Processes, Taylor & Francis Publishers.2010, Volume 25, Issue 10. Pp. 1041 – 1047.
    15. Pushpendra S. Bharti, S. Maheshwari, C.Sharma: “A comparative study of Artificial Neural Network training algorithms for modeling of Electric Discharge Machining process”. Strojnícky Èasopis - Journal of Mechanical Engineering, Slovak, Vol. 61, No. 5-6, 2010, pp. 323-340. (ISSN: 0039-2472).
    16. Anil Kumar, S.Maheshwari, C.Sharma, Naveen Beri “Research developments in additive mixed electric discharge machining (AEDM): A state of art review” Journal of Materials and Manufacturing Processes, Taylor & Francis Publishers.2010, Volume 25, Issue 10. pp.1166 – 1180.
    17. Naveeen Beri, S. Maheshwari, C. Sharma, A. Kumar: “Performance of a Powder Metallurgy Processed Electrode during Electrical Discharge Machining of Tool Steel Using the Taguchi Method”, Accepted for publication in Materials and Manufacturing Processes, Taylor & Francis Journal Manuscript ID: LMMP – 2009 – 0172.R1.
    18. Pushpendra S. Bharti, S. Maheshwari, C.Sharma. “Experimental investigation of Inconel 718 during die-sinking electric discharge machining”, International Journal of Engineering Science & Technology, Vol 2(11), 6464-3473, 2010. (ISSN: 0975-5462)
    19. Pushpendra S. Bharti, S. Maheshwari, C.Sharma: “Neural-network-based modeling of electric discharge machining process”, Advances in Intelligent and Soft Computing (Springer), AISC 87, pp. 95-103, 2011. (ISSN:1867:5662).
    20. Naveeen Beri, S. Maheshwari, C. Sharma, A. Kumar: “Multi-objective parametric optimisation during electrical discharge machining of Inconel 718 with different electrodes” International Journal of Materials Engineering Innovation (IJMatEI), Inderscience Volume 2, Number 3-4 / 2011 pp 236 – 248.
    21. Anil Kumar, S. Maheshwari, C. Sharma, Naveen Beri “Analysis of Machining Characteristics in Additive Mixed Electric Discharge Machining of Nickel Based Super Alloy Inconel 718”. Journal of Materials and Manufacturing Processes, Taylor & Francis Publishers. Volume 26, Issue 8, 2011, pp 1011 – 1018.
    22. Pushpendra S. Bharti, S. Maheshwari, C.Sharma, “Multi-objective optimization of electric-discharge machining process using controlled elitist NSGA-II”, Journal of Mechanical Sciences and Technology (Springer). Vol. 26 (6) (2012) pp. 1875~1883
    23. Anil Kumar, S. Maheshwari, C. Sharma, Naveen Beri “Experimental evaluation of graphite powder mixed AEDM on Inconel 718 using grey relation theory”, International Journal of Machining and Machinability of Materials (IJMMM) (Communicated).
    24. Anil Kumar, S. Maheshwari, C. Sharma, Naveen Beri “Machining Efficiency Evaluation of Cryogenically Treated Copper Electrode in Additive Mixed EDM” Journal of Materials and Manufacturing Processes, Taylor & Francis Publishers. Volume 27, Issue 10, 2012, pp 1051 – 1058
    25. Naveeen Beri, S. Maheshwari, C. Sharma, A. Kumar: “Multi-objective parametric optimization of electrical discharge machining of Inconel 718 with CuW powder metallurgy processed electrodes using grey relation theory” International Journal of Materials Engineering Innovation (IJMatEI) (Communicated).
    26. Naveeen Beri, S. Maheshwari, C. Sharma, A. Kumar: “Machining performance evaluation during electric discharge machining of Inconel 718 using the Taguchi Methodology” Strojnícky Èasopis - Journal of Mechanical Engineering, Slovak, (JME).
    27. 27. Anil Kumar, Sachin Maheshwari, Chitra Sharma. “Effect of Cryogenically Treated Electrode during AEDM of Nickel Based Super Alloy 718 for Surface Quality Improvement” Advanced Materials Research Vol. 410 (2012) pp 236-239 ISSN: 1662-8985
    28. 28. Naveeen Beri, S. Maheshwari, C. Sharma,, “Evaluation of Surface Quality During Electrical Discharge Machining of Inconel 718 with Powder Metallurgy Electrodes” Advanced Materials Research Vol. 410 (2012) pp 245-248 ISSN: 1662-8985
    29. Pushpendra S. Bharti, S. Maheshwari, C.Sharma, “Multi-objective Optimization of Die-Sinking Electric Discharge Machining” Applied Mechanics and Materials Vols. 110-116 (2012) pp 1817-1824. ISSN: 1660-9336.
    30. R Kumar, S. Maheshwari, C. Sharma, “Investigation of electronic flow regulated J-T cooling system for detector cooling applications” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Sage Publication November 2012; vol. 226, 4: pp. 309-315.
    31. A Kumar, H. Singh, S. Maheshwari, “Modeling and analysis of elongation for submerged arc-welded joints by using developed agglomerated fluxes” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Sage Publication July 2013; vol. 227, 7: pp. 1005-1012.
    32. C S Verma, Naresh Kr Sharma, Vijayaraghavan M Chariar, S Maheshwari, M K Hada. ”Comparative Study of Mechanical Properties of Bamboo Laminae and their Laminates with Woods and Wood based Composites.” JCOMB-D-13-00685, Journal of Composite Part: B, Elsevier Accepted on 24 December 2013. [In Press]
    33. Chak S. K., Rao P. V., “Drilling of Al2O3 using pulsed DC supply with rotary abrasive electrode by Electro-Chemical Discharge (ECD) Process”, Int. Journal of Advanced Manufacturing Technology, Vol. 39 (2008) 633 – 641.
    34. Chak S. K., Rao P. V., “Trepanning of Al2O3 by Electro-Chemical Discharge Machining (ECDM) Process using abrasive electrode with pulsed DC supply”, Int. Journal of Machine Tools & Manufacture, Vol. 47 (2007) 2061 – 2070.
    35. Jain V.K., Chak S.K., “Electrochemical Spark Trepanning of Alumina and Quartz”, Int. Journal of Machining Science and Technology, Vol. 4 (2) (2000) 277-290.
    36. D.K. Singh, “Economic Procurement Cycles in Response to JIT Concept”, Journal of the Institution of Engineers (India), Production Engg. Division, Vol. 85, September 2004, pp. 36-40.
    37. D.K. Singh, “The Scope of JIT Implementation”, Productivity, Vol. 45, No. 4, 2005, pp. 628-633.
    38. D.K. Singh, “How does JIT Work?”, Prestige Journal of Management and Research, Vol. 9, No. 1, April 2005, pp. 105-109.
    39. D.K. Singh, “An Exploration of the components of customer satisfaction affecting JIT Implementation”, Prestige Journal of Management and Research, Vol. 10, No. 1 & 2, April-October 2006, pp. 87-95.
    40. D.K. Singh, “JIT Implementation in the Service Sector”, Productivity, Vol. 47, No. 1-2, April-September 2006, pp. 55-63.
    41. D.K. Singh, “An Automated JIT Manufacturing System”, PCTE Journal of Business Management (An International Journal), Vol. 3, No.2, July-December 2006, pp.28-32.
    42. D.K. Singh, “JIT Implementation in Strategic Business Environment through Information Technology”, Industrial Engineering Journal, Vol.36, No.07, July 2007, pp.17-20.
    43. D.K. Singh, “JIT & TQM: Synergistic approach can lead to World Class Manufacturing”, Prestige Journal of Management and Research, Vol.11, No.1, April 2007, pp.82-92.
    44. D.K. Singh, “JIT Implementation and Indian Industries”, GITAM Journal of Management, Vol. 6, No. 4, Oct-Dec 2008, pp.120-128.
    45. D.K. Singh, “Manufacturing Flexibility and JIT”, PCTE Journal of Business Management (An International Journal), Vol. 5, No. 1, Jan-June 2008, pp.103-106.
    46. D.K. Singh, “Effect of Manufacturing Environment on JIT Implementation”, Rai Management Journal, Vol. 6, No. II, October 2008, pp.55-60.
    47. D.K. Singh, “Manufacturing Competitiveness through JIT”, Industrial Engineering Journal, Vol. II, No. 5, November 2009, pp.26-29.
    48. D.K. Singh, “Quality Management: An Essential Ingredient for JIT Implementation”, Productivity, Vol. 49, No. 4, January-March 2009, pp.327-334.
    49. D.K. Singh, “Synergy of JIT and Stockout situations in Manufacturing”, Prestige International Journal of Management and Research, Vol. 2 and 3, No.2 and 1, July 2009- January 2010, pp.41-47.
    50. D.K. Singh, “Kaizen Approach to Implement JIT”, GITAM Journal of Management, Vol. 10, No. 3, July-September 2012, pp.226-232.
    51. D.K. Singh, “JIT: A Strategic Tool of Inventory Management”, International Journal of Engineering Research and Applications (IJERA), Vol. 3, Issue 2, March-April 2013, pp. 133-136.
    52. D.K. Singh, “Working with JIT requires a Flexible Approach”, IOSR Journal of Mechanical and Civil Engineering (an International Journal),Vol. 5, Issue 6, March-April 2013, pp.24-28.
    53. D.K. Singh, “JIT: Various Aspects of its Implementation” International Journal of Modern Engineering Research (IJMER), Vol. 3, Issue 3, May-June 2013, pp.1582-1586.
    54. D.K. Singh, “A Comparative Study of JIT Implementation in Manufacturing and Service Sectors” (Communicated).
    55. D.K. Singh, “Supply Chain Management and JIT: In context of Information Technology” (Communicated).
    56. D.K. Singh, “Organizational Components affecting JIT Implementation” (Communicated).
    57. D.K. Singh, “Synergy of Quality Management and Supply Chain Management in JIT Implementation” (Communicated).
    58. D.K. Singh, “Synergy of Product Design and Cellular Manufacturing in JIT Implementation” (Communicated).
    59. D.K. Singh, “Supply Chain Flexibility and Customized Manufacturing: A JIT Perspective” (Communicated).
    60. D.K. Singh, “Quality Certification and Benchmarking Applications in JIT” (Communicated).
    61. Vijyant Agarwal, “Trajectory planning of redundant manipulator using fuzzy clustering method, “International Journal of Advanced Manufacturing Technology” (Springer-Verlag), Volume 61, Issue 5-8, pp 727-744,2012.
    62. Vijayant Agarwal, A.P. Mittal, and B.C. Nakra, “Design and analysis of clustering algorithm for a redundant manipulator”, published in The International Journal of Computers, Informational Technology, and Engineering, vol. 1 (2), pp. 53-59, 2007.
    63. Vijayant Agarwal, A.P.Mittal, “Mathematical modeling of Machine learning technique for the solution of inverse harmonic non-linear equations” published in Automation, computers, Applied Mathematics,(International Journal),Vol. 17(2008).
    64. V. Agarwal, B.C. Nakra and A.P. Mittal, “Inverse Kinematics of Manipulator Using Weighted Fuzzy Clustering Method for Fuzzy Training Data” published in IJAISC (International Journal Artificial Intelligence and Soft Computing, Inderscience, vol.1(2/3/4)(2009).
    65. Neetu Sardana, Vijayant Agarwal, Pushpa Suri, “Extensible Markup Language (XML) Commutation on non-linear data using conventional and soft computing methods” published in International Journal of Computing and Application, July to Dec. 2009.
    66. Vijayant Agarwal, Rhythm Suren Wadhwa, “Neural Network Approach to Robot Motion Control”, Advanced Materials Research, vol.403-408, pp.4753-4756, (2012).
    67. Gargi Agarwal, Vijyant Agarwal, A Survey Paper on: Fuzzy Mathematical Morphology Techniques for Digital Image Processing, Advanced Materials Research, vol.403-408, pp.3469-3475, (2012).
    68. Vijaynt Agarwal, Aastha Chhabra, Krit Gupta, “Fuzzy Clustering Techniques for Optimum Currency Area Variables”, International Journal of Enhanced Research in Management & Computer Applications,vol.2,Issue2(2013).Shiv Manjaree,
    69. Vijyant Agarwal, and B.C. Nakra, “Inverse Kinematics Using Neuro-Fuzzy Intelligent Technique for Robotic Manipulator” International Journal of Advanced Computer Research, Volume-3, Number-4,Issue-13 (2013)
    70. Shiv Manjaree, Vijyant Agarwal, and B.C. Nakra, “Kinematic Analysis Using Neuro-fuzzy Intelligent Technique for Robotic Manipulator” International Journal of Engineering Research and Technology, Volume 6, Number 4 pp. 557-562, (2013).
    71. Aarshay Jain, Deepansh Jagotra, Vijyant Agarwal, “Implementation and validation of Artificial Intelligence techniques for Robotic Surgery”, International Journal of Advanced Computer Research (2014)-Accepted for publication.
    72. Bhuvan Arora, Dharmendra Tarkar and Pradeep Khanna, “Design and Performance Analysis of a Slotted Rotary Disc Feeder”. International Journal of Technology and Engineering System (IJTES), Vol.2, No.1, pp. 49-53, Jan-March 2011.
    73. Pradeep Khanna and Arun Kanda, “Emerging Concepts of Agility- A Review”. Industrial Engineering Journal, Vol. II, Issue No.4, pp 28-34, April 2012.
    74. Sonali Yadav and Pradeep Khanna, “Statistical Modelling Approach for Optimization of a Pneumatic Reciprocating Step Feeder”. International Journal of Power Control Signal and Computation (IPJCSC), Vol.5, No.1, pp.37-55, Jan-March, 2013.
    75. Alok Nahata, Ankush Agarwal and Pradeep Khanna, “Deasign Fabrication and Analysis of Magnetic Belt type Feeder”, Advanced Materials Research, Vols. 694-697 (2013) pp 2116-2120. Transtech Publications, Switzerland.
    76. Ankush Agarwal, Alok Nahata and Pradeep Khanna, “Mathematical Analysis of Magnetic Belt type Feeder”, International Journal of Latest Trends in Engineering and Technology (IJLTET), Vol 3, Issue 1, pp. 8-16, September 2013.
    77. Ritika Punn, Shruti Bansal, Sakshi Jain, Meenakshi Goel and Pradeep Khanna, “Graphical Modelling Approach for Optimization of a Rotary Hook Feeder”. International Journal of Research in Mechanical Engineering (IJRMET), Vol.3, Issue 2, pp. 136-138, May-Oct 2013.
    78. A.V. Muley, Guatum Batra, Divya Rao, Kumud Nishad, Mayank Sharma, Design and Analysis of Ballistic Helmet, Mechanica Confab, Vol.1 No.3 December 2012
    79. Andriya, N., Venkateswara Rao, P., Sudarsan Ghosh., A Comparison of cooling techniques on cutting force and surface roughness in Ti-6Al-4V machining. International Journal of Advanced Manufacturing Technology, 2012: p. Communicated.
    80. Chetan, Andriya. N., Sudarsan Ghosh, Venkateswara Rao. P (2014). "Invesitgations of tool wear mechanisms adn mathematical modeling of falnk wear during machinig of Ti-Alloy (Ti-6Al-4V)." Part B: Journal of Engineering Manufacture Communicated.
    81. Pramendra Kumar Bajpai, Inderdeep Singh, Drilling Behaviour of Sisal Fiber Reinforced Polypropylene Composite Laminates, Journal of Reinforced Plastics and Composites, 32, 2013, Impact factor = 0.727.
    82. Pramendra Kumar Bajpai, Dharmendra Meena, Shrey Vatsa, Inderdeep Singh, Tensile Behaviour of Nettle Fiber Composites Exposed to Various Environments, Journal of Natural Fibers, 10, 2013, 244-256, Impact factor = 0.25.
    83. Pramendra Kumar Bajpai, Inderdeep Singh, Jitendra Madaan, Joining of Natural Fiber Reinforced Composites using Microwave Energy: Experimental and Finite Element Study, Materials and Design, 35, 2012, 596-602, Impact factor = 2.2.
    84. Pramendra Kumar Bajpai, Inderdeep Singh, Jitendra Madaan, Tribological Behaviour of Poly Lactic Acid (PLA) based Green Composites, Wear, 297, 829-840. Impact factor = 1.872.
    85. Pramendra Kumar Bajpai, Inderdeep Singh, Jitendra Madaan, Development and Characterization of PLA based ‘Green’ Composites: A Review, Journal of Thermoplastic Composite Materials, DOI: 10.1177/0892705712439571, Impact factor = 0.865.
    86. Pramendra Kumar Bajpai, Inderdeep Singh, JitendraMadaan, Comparative Studies of Mechanical and Morphological Properties of PLA and PP-based Natural Fiber Composites, Journal of Reinforced Plastics and Composites, 31, 2012, 1712-1724. Impact factor = 0.727.
    87. Pramendra Kumar Bajpai, Inderdeep Singh, Jitendra Madaan, Frictional and Adhesive Wear Performance of Natural Fiber Reinforced Polypropylene Composites, Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, 227, 2013, 385-392, Impact factor = 0.733.
    88. Pramendra Kumar Bajpai, Inderdeep Singh, Jitendra Madaan, Finite element model for microwave heating of thermoplastic composites, International Journal of Materials Engineering Innovation, 3, 2012, 247-258.
    89. Singh, P. K. Bajpai, D. Malik, J. Madaan, N. Bhatnagar, Microwave Joining of Natural Fiber Reinforced Green Composites, Advanced Materials Research, 410, 2012, 102-105.
    90. Singh, P.K. Bajpai, D. Malik, A.K. Sharma, P. Kumar (2011). Feasibility Study on Microwave Joining of ‘Green Composites’. Akademeia 1(1): ea0101.
    91. “Hybrid Intelligent System for the Modeling of Design Parameters of Connecting Rod”, G.D. Gautam, Abhishek Tevatia, and S.K. Srivastava, International Journal of Engineering Research and Technology, ISSN 0974-3154, Vol 5, No. 1, pp. 61-72, 2012.
    92. “Modeling of Design Parameters of Connecting Rod using Multiple Computer Aided Techniques”, Abhishek Tevatia, G.D. Gautam, and S.K. Srivastava, International Journal of Mechanics Structural, ISSN 0974-312X, Vol. 6, No. 2, pp. 129-138, 2011.
    93. “Shape Optimization of Connecting Rod using Strain Life Theory”, Abhishek Tevatia, and S.K. Srivastava, International Review of Applied Engineering Research, ISSN 2248-9967, Vol. 1, No. 2, pp. 105-113, 2011.
    94. “Fatigue Life Prediction of Connecting Rod using Strain Life Theories”, Abhishek Tevatia, and S.K. Srivastava, Global Journal of Engineering and Technology, ISSN 2249-3107, Vol. 1, No. 1, pp. 11-20, 2011.
    95. “Finite Element Fatigue Analysis of Connecting Rod of Different Cross-Sections”, Abhishek Tevatia, S.B. Lal, and S.K. Srivastava, International Journal of Mechanics and Solids, ISSN 0973-1881, Vol. 6, No. 1, pp. 44-53, 2011.
    96. “Fatigue Analysis of Connecting Rod using ANSYS Code”, S.B. Lal, Abhishek Tevatia and S.K. Srivastava, International Journal of Mechanics and Solids, ISSN 0973-1881, Vol. 5, No. 2, pp. 143-150, 2010.
    97. Umang Soni, Vipul Jain, M. Paz Salmador, International Journal of Procurement Management, Coping with uncertainties via Resilient Supply Chain Framework (Accepted)
     

    International/National Conferences:

    1. Maheshwari Sachin, Pandey Sunil, Robert Fenn, Apps R. L., ‘Element transfer behaviour of fluxes during submerged arc welding’, International Symposium on 50 years of Metallurgy: Retrospect & Prospect, organised by Indian Institute of Metals, New Delhi, Nov 14 - 18, 1996.
    2. Maheshwari Sachin, Pandey Sunil, ‘Changes in weld metal composition during submerged arc welding as a function of electrochemical reactions’. NWS’ 97, International conference organised by Indian Institute of Welding at IISc Bangalore, Dec 11-13, 1997.
    3. Maheshwari Sachin, Pandey Sunil, ‘Effect of flux constituents on metal transfer behaviour during submerged arc welding’. A conference organised by ASM International at Georgia Atlanta, Jun 1-4, 1998.
    4. Sachin Maheshwari, Sunil Pandey, ‘Development of Real Time Recording Facility for V-I Transients to Study the Effect of Flux Constituents during Submerged Arc Welding.’, International Welding Conference on Welding and Allied Technology, organised by the Indian Institute of Welding in association with Confederation of Indian Industry, New Delhi, 15-17 February 1999.
    5. Shankar Singh, P.C. Pandey, & S. Maheshwari, 2002, Thermo Mathematical Models for Electric Discharge Machining: An Overview, Proceedings 2nd International Conference on Manufacturing ICM 2002, Dhaka 1000, Bangladesh, August 9-11, 2002, vol. I, pp. 492-500.
    6. Shankar Singh, P.C. Pandey, S. Maheshwari and D.Arunkumar, 2002, Role of Information Technology in Manufacturing, Proceedings 2nd International Conference on Manufacturing ICM 2002, Dhaka 1000, Bangladesh, August 9-11, 2002, vol. I, pp. 686-692.
    7. P. K. Choudhary, M. Aggarwal, V. Lal, S. Maheshwari, S. Singh, 2003 “Knowledge Based CAD Systems” International Conference on CAD, CAM, Robotics and Autonomous Factories (INCARF-2003) Organised by IIT Delhi Aug 11 – 13, 2003 at IIT Delhi.
    8. Shankar Singh, S. Maheshwari and P. C. Pandey, “Some investigations on electric discharge machining of hardened tool steels using different electrodes”. (Ref. IS 37), Proceedings, 14th International Symposium on Electromachining (ISEM XIV), Edinburg, Scotland, 30 March – 1 April 2004.
    9. Singh, S, Maheshwari, S. Dey, A. et.al, “Electric Discharge Machining of Aluminum Matrix Composites”. (paper no. M 15), Proc. International Conference on Recent Advances in Composite Materials (ICRACM 2004) organized by Department of Mechanical Engineering, Institute of Technology, Banaras Hindu University, Varanasi – 221005, India, December 17 – 19, 2004, pp. 459 – 463.
    10. Shankar Singh, Sachin Maheshwari, Alok Dey and P.C. Pandey, ‘An Experimental Study of Die Sinking Electrical Discharge Machining of AISI D2 Tool Steel Using Different Electrode Materials’, (Identification code: COBEM2005-0468), In; e-proceedings (proceedings in CD-ROM), 18th International Congress of Mechanical Engineering – COBEM 2005, Ouro Preto, Brazil, 6-11 Nov 2005.
    11. Shankar Singh, Sachin Maheshwari and Aloke Dey, ‘Experimental Investigations in to Abrasive Electrical Discharge Machining (AEDM) of Cast Aluminium Metal Matrix Composites (Al/Al2O3p-20%)’ (Paper Reference No.: 2144)’, In: e-proceedings (proceedings in CD-ROM) of Tehran International Congress on Manufacturing Engineering (TICME2005), Tehran, Iran, 12-15 Dec, 2005.
    12. Shankar Singh, Sachin Maheshwari, Aloke Dey and P.C. Pandey, ‘Study of Electrical Discharge Machining of Cast Aluminium Alloy Based Metal Matrix Composites (6061Al-Al2O3p-20%) – A Taguchi Approach (Paper Ref. No.: 156)’, In: Proceedings of 14th ISME, International Conference on Mechanical Engineering in “Knowledge Age”, December 12-14, 2005, Vol. 1, pp. 470-477.
    13. Kamal Kant, Laxmi Kant, Rajesh Kumar, Shankar Singh and Sachin Maheshwari, ‘A Comparative Study of the Effect of Electrode Cross-Section on Electric Discharge Machining of AISI 6150 Tool Steel’ (Paper Reference No. 173), In: Proceedings of 14th ISME, International Conference on Mechanical Engineering in “Knowledge Age”, December 12-14, 2005, Vol. 1, pp. 478- 483.
    14. K. Garg, S. Bhardwaj, T. Arora, Harshvardhan, Shankar Singh and Sachin Maheshwari, ‘Experimental Investigations Into Electric Discharge Machining Of Al-Sicp-10p With Rotating Electrode’, (Paper Reference No. 172) In: e- proceedings of 14th ISME, International Conference on Mechanical Engineering in “Knowledge Age”, December 12-14, 2005, Vol. 2. (In Press)
    15. Shankar Singh, Sachin Maheshwariand R. Singh, ‘The Electrical Discharge Machining Characteristics of Al/Al2O3P/20p Metal Matrix Composites Using Abrasive Powder Suspended in Dielectric Fluid’, (Code No. INFF525), In: Proceedings of the International Conference on 'Resource Utilization and Intelligent Systems' (INCRUIS-2006), Kongu Engineering College, Perundurai, Erode, 4-6 Jan ’2006, pp. 632 - 637.
    16. Shankar Singh and Sachin Maheshwari, ‘The Influence of Process Parameters on the Machining Characteristics in Electrical Discharge Machining of Al2O3p/6061Al Metal Matrix Composite’, In: Proceedings, International Conference on Advances in Materials and Materials Processing (ICAMMP-2006), IIT Kharagpur, 3-5 February 2006, pp. 655-662.
    17. Sharma, M.Kandpal, A. Bansal, S. Harshvardhan, S. Maheshwari and Shankar Singh, ‘An Experimental Investigation in Electric Discharge Machining of Hot Work Tool Steel’, (Paper Reference No. MC-11) Proceedings of International Conference on ‘Advances in Materials Processing and Characterization’ (AMPC 2006)”, College of Engineering, Guindy, Chennai, 28 -30th August 2006, Vol. 1., pp. 375-382.
    18. Shankar Singh, Sachin Maheshwari and Aloke Dey ‘Design, Experimental Results and Analysis of A Study on Abrasive Electrical Discharge Machining (AEDM) of Aluminium Metal Matrix Composites – The Lenth`S Method’-, First International & 22nd All India Manufacturing Technology Design and Research Conference (22nd AIMTDR) (December 21st – 23rd, 2006), IIT, Roorkee, Roorkee (UA).pp. 997 – 1002.
    19. Shankar Singh and Sachin Maheshwari, “Optimization of Machining Parameters in Electrical Discharge Machining of Al2O3/6061Al Composites Based on Taguchi's Method”,- Proceedings, Second International Conference on Recent Advances In Composite Materials (ICRACM-2007), Organized By Dept. of Mechanical Engg., Institute of Technology, Banaras Hindu University, Varanasi, 20-23 February, 2007 at India Habitat Center, New Delhi, pp. 953-961.
    20. N. Mittal, S. Ravi, M. Saxena, Shankar Singh, Sachin Maheshwari, “Optimization of Drilling Parameters of Al/SiCp-15p Metal Matrix Composites By Taguchi DOE Methodology”. Proceedings, Second International Conference on Recent Advances In Composite Materials (ICRACM-2007), Organized By Dept. of Mechanical Engg., Institute of Technology, Banaras Hindu University, Varanasi, 20-23 February, 2007 at India Habitat Center, New Delhi, pp. 893-897.
    21. S. Harshvardhan, Shankar Singh, A. Sharma, A. Bansal M. Kandpal, S. Maheshwari, “Determination of Optimal Parameter Settings in Electrical Discharge Machining (EDM) of Hot Work Tool Steel AISI H13 - A Taguchi Approach”. e-proceedings, Global Conference on Production and Industrial Engineering (CPIE-2007) (March 22-24, 2007), at NIT, Jalandhar.
    22. N. Mittal, S. Ravi, M. Saxena, Shankar Singh, Sachin Maheshwari, “Determination Of Optimal Parameter Settings In Conventional Drilling of Aluminium Metal Matrix Composites(Al-MMCs) - A Taguchi Approach”. e-proceedings, Global Conference on Production and Industrial Engineering (CPIE-2007) (March 22-24, 2007), at NIT, Jalandhar.
    23. Shankar Singh and Sachin Maheshwari, ‘Application of Taguchi Method for Determination of the Effects of Machining Parameters on Performance Measures in Electric Discharge Machining of 6061Al-Al2O3. Proceedings, 15th International Symposium on Electro Machining (ISEM XV) (April 23 – 27, 2007), Organized by Nebraska University-Lincoln, Pittsburgh, PA, U.S.A. pp. 475-480.
    24. D. Gosain, D. Jyoti, D. Asiwal, S. Singh, S. Maheshwari, S. Agarwal, “Design and Development of a Foot Controlled Mobility Device” Proceedings of BioMed2007 2nd Frontiers in Biomedical Devices Conference June 7-8, 2007; Irvine, California, USA
    25. Sharma, A., Harshavardhan, S., Kandpal, M., Bansal, A., Maheshwari, S., Singh, S., "Application of CAD/CAM Integration for Automation of Wood carving Operations", Proceedings of 23rd ISPE International Conference on CAD/CAM, Robotics & Factories of the Future, Bogota, Colombia, 16-18th August 2007.
    26. Harshavardhan, S., Sharma, A., Maheshwari, S., Singh, S., "Development of a Special Purpose Automated XYZ Table for Wood Carving Industries” Proceedings of IMECE2007 ASME International Mechanical Engineering Congress and Exposition November 11-15, 2007, Seattle, Washington, USA.
    27. Pushpendra S. Bharti, S. Maheshwari, C.Sharma, “An approach for the selection of training data set for Artificial neural Network modeling of Electric Discharge Machining” The 2nd International Conference on Engineering & ICT (ICEI), Bendahari University Teknikal Malaysia, Melaka, Feb 2010, pp 819-822.
    28. Animesh Garg, Anju Toor,Sahil Thakkar, Shiwangi Goel, Sachin Maheshwari, Satish Chand, “The Autotrix: Design and Implementation of an Autonomous Urban Driving System” Proceedings of ICCRC 2011 International Conference on Control, Robotics and Cybernetics March 21-23, 2011, New Delhi, India pp V1-144 – 149.
    29. Pushpendra S. Bharti, S. Maheshwari, C.Sharma, “Multi-objective optimization of die-sinking electric discharge machining”, Proceedings of IEEE International conference on mechanical and aerospace engineering(CMAE 2011), March 2011, India, pp 461-465 (ISBN: 978-1-4244-6505-4).
    30. Maheshwari Sachin, Pandey Sunil, Robert Fenn, Apps R. L., ‘ Effect of flux ingredients on weld metal composition.' Xth ISME conference on Mechanical Engineering, New Delhi, December 9 - 11, 1996.
    31. Maheshwari Sachin, Pandey Sunil, ‘Design of flux formulations for general purpose submerged arc welding of low carbon steel. , ‘Conference on ‘Emerging trends in welding technology’ organised by Indian Institute of Welding at hotel Hyatt Regency New Delhi, Feb 8, 1997.
    32. Maheshwari Sachin, Pandey Sunil, ‘Power Source behaviour and prediction of welding current in submerged arc welding’. Conference on ‘Emerging trends in welding technology’ organised by Indian Institute of Welding at hotel Hyatt Regency New Delhi, Feb 8, 1997.
    33. Sachin Maheshwari, Sunil Pandey, ‘Studies on Arc Stability and Bead Penetration Behaviour during SAW with CaO – SiO2 – Al2O3 based fluxes’. Seminar on ‘Recent Developments on Welding’, organised by the Indian Institute of Welding at Hotel The Park, New Delhi, 15th April, 2000
    34. Kshitiz Malik, Pallav Negi, Vikram Dhar, Sachin Maheshwari , 2003 “An Architecture for Optical Interconnection of Processing Elements” Conference of Optics and Photonics in Engineering COPE – 03 organised by N. S. I. T. New Delhi, January 6 – 8, 2003.
    35. S. Maheshwari, P. C. Pandey, S. Pandey, Y. Marwaha, Narendra Mohan, 2003 “ Low Cost Development of Remote Welding Unit” National Workshop on Welding Technology in India – Present Status and Future Trends organized by Mechanical Engineering Department of SLIET, Longowal in collaboration with Indian Institute of Technology Delhi & Indian Welding Society, April 25 – 26, 2003, pp. 14 – 20.
    36. Narendra Mohan, Singh Kulwant, Maheshwari Sachin, Pandey Sunil, 2003 “ Flux Formulation and Element Transfer Behavior in Submerged Arc Welding ” National Workshop on Welding Technology in India – Present Status and Future Trends organized by Mechanical Engineering Department of SLIET, Longowal in collaboration with Indian Institute of Technology Delhi & Indian Welding Society, April 25 – 26, 2003, pp. 21 – 29.
    37. Shankar Singh, Sachin Maheshwari, P. C. Pandey, 2003 “ Abrasive Electro – Discharge Machining – An Innovative Technique in Hybrid Machining ” Proceedings of the National Conference on “ World Class Manufacturing” Organised by Amrita Institute of Technology, Coimbatore 641 105, May 7 – 9, 2003. India. pp. 01 – 06.
    38. Hemanshu Jain, Sachin Maheshwari, “Techniques For Determining Weld Bead Parameters From Its’ Image” National Conference on Recent Developments in Mechanical Engineering “NCME 2003” organised by Mechanical Engineering Department, Thapar Institute of Engineering and Technology, Patiala, India, October 31st - November 1st , 03, pp. 572-575
    39. Mayur Bansal, Mukesh Kumarand Sachin Maheshwari, “A Universal Data Acquisition System For Arc Welding Processes”, National Conference on Recent Developments in Mechanical Engineering “NCME 2003” organised by Mechanical Engineering Department, Thapar Institute of Engineering and Technology, Patiala, India, October 31st - November 1st , 03, pp. 551-556
    40. Shankar Singh, Sachin Maheshwari, P. C. Pandey, 2003, “Taguchi approach and design of experiments for TQM: an overview” National Conference on Recent Developments in Mechanical Engineering “NCME 2003” organised by Mechanical Engineering Department, Thapar Institute of Engineering and Technology, Patiala, India, October 31st - November 1st , 03, pp. 335-338
    41. Shankar Singh, Sachin Maheshwari, P. C. Pandey, 2003“Analysis of the abrasive EDM for machining of advanced materials”, National Conference on Recent Developments in Mechanical Engineering “NCME 2003” organised by Mechanical Engineering Department, Thapar Institute of Engineering and Technology, Patiala, India,October 31st - November 1st , 03, pp. 610-614
    42. Narendra Mohan, Sunil Pandey, Sachin Maheshwari, Kulwant Singh, 2003, “Flux Designing and Element Transfer Behavior in Submerged Arc Welding”. National Conference on Recent Developments in Mechanical Engineering “NCME 2003” organised by Mechanical Engineering Department, Thapar Institute of Engineering and Technology, Patiala, India, October 31st - November 1st , 03, pp. 534 – 538.
    43. Kulwant Singh, Sunil Pandey, Narendra Mohan, Sachin Maheshwari, Hazoor Singh, 2003, “Investigations into Flux Compositions in Submerged Arc Welding”. National Conference on Recent Developments in Mechanical Engineering “NCME 2003” organised by Mechanical Engineering Department, Thapar Institute of Engineering and Technology, Patiala, India, October 31st - November 1st , 03, pp. 557-562
    44. M. L. Aggarwal, V. P. Agrawal, Sachin Maheshwari, 2004, “Avoidance of Microwelds in leaf springs used in Automative Vehicles”. National Seminar on Emerging Trends in Manufacturing Systems “ETMS – 2004” organized by Department of Mechanical Engineering & Technology, Sant Longowal Institute of Engineering & Technology Longowal, District Sangrur, India in association with Indian Welding Society, Longowal Centre, January 18 – 19, 2004.
    45. Divya Kumar, Amit Raju, Sachin Maheshwari, 2004, “Just in time Manufacturing & Allied Systems”. National Seminar on Emerging Trends in Manufacturing Systems “ETMS – 2004” organized by Department of Mechanical Engineering & Technology, Sant Longowal Institute of Engineering & Technology Longowal, District Sangrur, India in association with Indian Welding Society, Longowal Centre, January 18 – 19, 2004.
    46. Gaurav Goel, Amit Gupta, Sachin Maheshwari, 2004, “Software design for Integration of Manufacturing Activities”. National Seminar on Emerging Trends in Manufacturing Systems “ETMS – 2004” organized by Department of Mechanical Engineering & Technology, Sant Longowal Institute of Engineering & Technology Longowal, District Sangrur, India in association with Indian Welding Society, Longowal Centre, January 18 – 19, 2004.
    47. Aggarwal, M. L. Agrawal, V. P. Maheshwari, S., “Effect of Shot Peening on Surface Characteristics of EN 45 A Spring Steel”, Proc. First National Conference on Development and Challenges in Manufacturing Engineering 2004 organized by Department of Mechanical and Industrial Production Engineering Manipal Institute of Technology Manipal India in association with All India Council of Technical Education, New Delhi, India, March 18 – 20, 2004, pp. 203 – 209.
    48. Bharati, P. S. Maheshwari, S. “Some studies on the application of Neural Network Approach to Optimise the Process Parameters of Electric Discharge Machine”. Proc. of 92nd Indian Science Congress organized by The Indian Science Congress Association Kolkata, January 3 – 5, 2005 .Proc. 92nd Ind. Sc. Cong.. Part-llI: (Advance Abstracts) pp 10.
    49. Singh, S. Maheshwari, S. Pandey, P. C. Dey, A. “Electric Discharge Machining of Particle Reinforced Metal Matrix Composite”. Proc. National Conference on “Advances in Manufacturing Technology in the Era of Globalization (AMTEG – 2005), Organized by Department of Production Engineering, Pune Institute of Engineering & Technology (formerly Govt. College of Engineering Pune), Pune – 411005, January 21 – 22, 2005, pp. 311 - 316
    50. Rishabh Gupta, Nishant Bhardwaj and Sachin Maheshwari, “Automatic Vehicle Control - Autonomous Guidance using Image Recognition and Collision Detection”, Proceedings of The Conference on Computer Aided Design and Manufacturing: A Global Perspective organized by MED, TIET, Patiala. April 8-9, 2005.
    51. Sachin Maheshwari, Prashant Kumar Choudhary and Shankar Singh, “Information Technology in Manufacturing: Past, Present and Future Trends”, Proceedings of The Conference on Computer Aided Design and Manufacturing: A Global Perspective organized by MED, TIET, Patiala. April 8-9, 2005.
    52. Pallav Negi, Hemanshu Jain, Ankur Mittal and Sachin Maheshwari, “Tool Path Simulation and Optimization for CNC Machines”, Proceedings of The Conference on Computer Aided Design and Manufacturing: A Global Perspective organized by MED, TIET, Patiala. April 8-9, 2005.
    53. Shankar Singh and Sachin Maheshwari ‘Effect of Electrode Rotation on Machining Characteristics in Electrical Discharge Machining of Hot Work Tool Steel AISI H11’ National Conference on Recent Developments in Mechanical Engineering (NCME-2006) (Nov. 10–Nov.11 2006), Thapar Institute of Engg. & Technology (TIET), Patiala (Pb.) pp 175 – 182.
    54. N. Beri, A. Kumar, S. Maheshwari, S. Singh, C. Sharma ‘Powder Metallurgy Tool Electrode in EDM: A State of Art Review’ National Conference on Recent Developments in Mechanical Engineering (NCME-2006) (Nov. 10–Nov.11 2006), Thapar Institute of Engg. & Technology (TIET), Patiala (Pb.) pp 210 – 216.
    55. “Machining of SiC by ECDM process using different electrode configurations under the effect of pulsed DC”, Chak S. K. & Rao P. V. presented at 4th International & 25th AIMTDR 2012 Conference Jadavpur University, Kolkata, India (14th – 16th Dec. 2012) Vol. (1) 513 - 519.
    56. D.K. Singh, “By-pass Factor for Dehumidifying Coil”, Eight National Symposium on Refrigeration and Air-conditioning, Feb. 26-27, 1988, IIT Kanpur.
    57. D.K. Singh, “Scope of Energy Conservation in Lighting”, All India Seminar on Thermal Insulation and other Devices for Conservation of Energy, Oct. 9-10, 1991, Institution of Engineers (India), New Delhi.
    58. D.K. Singh, “Quality Control in Development of Balancing Valve”, National Seminar on Energy Conservation and Management, Oct. 10-11, 1991, NIT, Kurukshetra.
    59. D.K. Singh, “Energy – Potential and Conservation”, National Solar Energy Convention, Dec. 28-30, 1992, IIT Delhi.
    60. D.K. Singh, “Renewable Energy: The Last Resort”, National Solar Energy Convention, Dec. 28-30, 1992, IIT Delhi.
    61. D.K. Singh, “Threats of Ozone Depletion and Environmental Degradation”, 10th ISME Conference on Mechanical Engineering, Dec. 9-11, 1996, DCE Delhi.
    62. D.K. Singh, “JIT Manufacturing and Information Technology: An Investigation into their Relationship”, International Conference on Challenges and Opportunities in Information Technology, Nov. 12, 2005, PCTE Ludhiana.
    63. Vijayant Agarwal, “Path Planning of Redundant Manipulator based on FCM”, the 14th International IASTED conference on Robotics and Application, Massachusetts, USA, November 2-4, 2009.
    64. Vijayant Agarwal, and A.P. Mittal, “An ANFIS based system for the LSPB trajectory of a redundant planar manipulator” in the Proceedings of the 25th IASTED International Conference on Modelling, Identification, and Control, Spain, February 6-8, 2006.
    65. Vijayant Agarwal, and Vineeta Agarwal, “Control of robotic manipulators using G.A. & ANN,” in the Proceedings of the 6th International Conference on Cognitive Systems, New Delhi, India, December 14-15, 2004.
    66. Vijayant Agarwal, A.P. Mittal, and B.C. Nakra, “A study of fuzzy logic based inverse kinematics solutions,” in the proceedings of International Conference on Computer Applications in Electrical Engineering Recent Advances, Roorkee, Sep. 29-Oct. 1, 2005.
    67. Vijayant Agarwal, and A.P. Mittal, “Soft Computing Paradigms for Learning Fuzzy Robotics Controllers”, Proceedings of the 7th International Conference on Cognitive Systems December 14-15, 2005, New Delhi, India.
    68. Neetu Sardana, P.R.Suri, Vijayant Agarwal, “Design and development of algorithm for porting XML data into flexible analysis platform” published in the ninth international conference on management of transformation held in January 3-5, 2008, New Delhi.
    69. Agarwal, Vijyant, Wadhwa, Rhythm Suren; Wang, Kesheng, “ Automated rules generation for robot’s trajectory planning.MITIP 2011, The 13th International MITIP conference , The Moderne Information Technology in the Innovation Processed of the Industrial Enterprise.
    70. Vijayant Agarwal, Gaurav Kappor, “ A study of machine vision incorporated with robotic system” in the COMET’04 (National Conference in Mechanical Engineering and Technology) at IT BHU.
    71. Vijayant Agarwal, Ganguly Pranav et.al., “ Design & Development of real time flexible robotic control interface” in the COMET’04( National Conference in Mechanical Engineering and Technology) at IT BHU.
    72. Vijayant Agarwal, and A.P. Mittal “Some issues of the informational paradigms” in the proceedngs of ISTE national conference on Electronics, Communication, Control, Computer Engineering, and Power-Energy, Gurgaon , India, April 07-08, 2007.
    73. Vijayant Agarwal, and A.P.Mittal “Transformation from mathematical modelling to informational paradigm” accepted in the ninth international conference on management of transformation to be held on January 3-5,2008,New Delhi.
    74. Vijayant Agarwal, B.C.Nakra and A.P.Mittal “Inverse Differential Motion of Manipulator by Soft Computing Techniques” published as a seminar paper in faculty development program on soft computing techniques workshop cum seminar ,organized by MAIT , Rohani, New Delhi.
    75. Aditya Kumar & T.P. Ghosh, A comparison of two concept of friction in Metal forming analysis. Trib Tech 96, Feb 23-24, Calcutta.
    76. Mayur Bansal, Mukesh Kumar, Sachin Maheshwari, Aditya Kumar, A Universal Data Acquisation Syste, for Arc Welding Processes, National Conference on Recent Development in Mechnical Engg., MED, TIET, Patiala, 31Oct & Nov 2003.
    77. R.S.Parmar and Pradeep Khanna, ‘Laser Beam Welding- Present Status and Future Prospects’ Souvenir, National Welding Seminar, Baroda, pp-29, December, 4-6, 2003.
    78. Pradeep Khanna and R.S.Parmar ‘Diode Lasers: Future of Laser Beam Welding.’ Proceedings, National Conference on Advances in Joining Technology, Hyderabad, pp. 45-51, January 23-24, 2004.
    79. N.K.Tewari and Pradeep Khanna ‘Mechanized Feeding: An integral element to manufacturing automation.’ Proceedings, UGC National Conference on Advances on Industrial Automation, Jodhpur pp. 18-25, March 20-21, 2004.
    80. Pradeep Khanna, Amit Gautam, Anirudh Gaur, Amit Juneja, Ambika Goel and Charumani, ‘Automated Feeding, Inspection, Stamping and Sorting System’, Proceedings, International Conference on Fluid Power Technology (EMCHAFT-2005), Chennai, vol. 1, pp 253-265, November, 27-28, 2005
    81. Ambika Goel, Charumani and Pradeep Khanna, ‘Rotary disc feeder: it’s performance analysis and study of various factors affecting it’, Proceedings, 14th International conference on Mechanical Engineering in Knowledge Age, New Delhi, vol. 1, pp. 421-428, December, 12-14, 2005.
    82. Akshat Gupta, Gunjan Agarwal, Natrajan Sankar and Pradeep Khanna, ‘Design, Fabrication and Analysis of a Reciprocating Funnel Feeder’, Proceedings, International conference on Advances in Mechanical Engineering, Punjab, pp. 228-234, December 1-3,2006.
    83. Akshat Gupta, Gunjan Agarwal and Pradeep Khanna. ‘Performance Analysis and Mathematical Modelling of a vibratory bowl feeder’, Proceedings, International conference on Advances in Manufacturing & Technology Management (ICAMTM 2007), Mumbai, pp. 492-497, January 18-20, 2007.
    84. Akshat Gupta, Girish Singhi, Gunjan Agarwal, Natrajan Sankar and Pradeep Khanna, ‘Design and Fabrication of an Agile Sorting and Feeding System’ Proceedings, World Congress on Engineering and Computer Science, 2007, San Fransisco, USA, pp. 542-547, October 24-26, 2007
    85. Rahul Pandhi, Sumit Khurana, Rajesh Rohilla and Pradeep Khanna “Intelligent Assistive Feeding Device for Physically Handicapped”, Proceedings, International Conference on Bioinformatics & Computational Biology, BIOCOMP-2007, Las Vegas, pp 243-247, June 25-28, 2007
    86. Pradeep Khanna, Astha Kukreja, Gaurav Kumar, Varsha Krishnan and Varun Kumar, ‘Design and Fabrication of External Gate Feeder and Study of Various factors affecting it’. Proceedings, National Conference on Emerging Trends in Mechanical Engineering, ( ETME-2008) Vallabh Vidyanagar, Gujarat, March, 28-29, 2008.
    87. Akshay Aggarwal, Astha Kukreja, Mayank Sharma, Pankaj Chopra and Pradeep Khanna ‘Stationary Hook Hopper Feeder: Design, Fabrication and Study of Various Factors Affecting it’. Proceedings, National Conference on Emerging Trends in Mechanical Engineering, (ETIME, 2008), BMS College of Engg. Bangalore, abstracted at pp-51, August 28-29, 2008.
    88. Pradeep Khanna, Shiwangi Goel, Aman Aggarwal, Arpit Chhabra and Gaurav, ‘Design and Fabrication of Automated Flipping Mechanism for Solar Cells’, Proceedings, National Conference on Emerging Trends in Mechanical Engineering, (ETIME, 2008), BMS College of Engg. Bangalore, abstracted pp-55, August 28-29, 2008.
    89. Charu Verma, J. Urvashi, Pradeep Khanna, Snigdha Anand and Usha Meena, “Reciprocating Fork Feeder: Its Performance Analysis and Study of Various Factors Affecting it”. Proceedings, International Conference on Advances in Mechanical Engineering (ICAME-2008), S.V. NIT, Surat, Gujarat, pp. 589-594, December, 15-17, 2008.
    90. Pradeep Khanna, Shiwangi Goel and Anju, “Design Fabrication and Analysis of Centerboard Hopper Parts Feeder”. Proceedings, International Conference on Advances in Mechanical Engineering (ICAME-2008), S.V. NIT, Surat, Gujarat, pp. 760-765, December, 15-17, 2008.
    91. Gunmeet Singh, Kumud Nishad, Divya, Apoorva Jain and Pradeep Khanna ‘Magnetic Elevating Hopper Feeder: Design Fabrication and Analysis of Various Factors Affecting it’, Proceedings, National Conference on Advances in Mechanical Engineering (NCAME 2009), MIT Moradabad, pp. 192-197, February 28 and March 1, 2009.
    92. Charu Verma, Snigdha Anand and Pradeep Khanna, “Design and Fabrication of Rotating Spoke Feeder and Study of Various Factors Affecting its Performance’. Proceedings, Internatioal Conference on Technology (ITECH-09), Amrutvahini College of Engineering, Sangamner, Maharashtra, abstracted pp. 125, March 4-5, 2009.
    93. Pradeep Khanna, Bikash Ranjan Shukla, Chakshu Jain and Sahil Thakkar, “Design and Fabrication of Centrifugal Hopper Feeder and Study of Factors affecting It”, Proceedings, International Conference on Advanced Manuacturing and Automation (INCAMA-2009), Kalaslingam University, Tamilnadu, abstracted pp. 151, March 26-28, 2009.
    94. Arjun Gupta, Bhanu Arora, Nihit Bhatnagar and Pradeep Khanna, “Elevation Hopper Feeder: Design, Fabrication and Study of Different Parameters”, Proceedings, International Conference on Advanced Manuacturing and Automation (INCAMA-2009), Kalaslingam University, Tamilnadu, abstracted pp. 152, March 26-28, 2009.
    95. Pradeep Khanna, Anju and Shiwangi Goel, “Mathematical Analysis of Centreboard Hopper Parts Feeder”, Proceedings, International Conference on Advanced Manuacturing and Automation (INCAMA-2009), Kalaslingam University, Tamilnadu, abstracted pp. 172, March 26-28, 2009.
    96. Ankush Gupta, Arpit Saraf, Jitin Luthra, Nitin Gupta and Pradeep Khanna, “Mathematical Modelling and Performance Analysis of a Tumbling Barrel Hopper Feeder”. Proceedings, International Conference on Recent Advances in Mechanical Engineering (ICRAME-2010), Kumaracoil, Tamilnadu, pp.294-298, April, 8-9 2010.
    97. Tanvi Gupta, Charu Garg Shachee Goswami and Pradeep Khanna, “Reciprocating Block Feeder: Its Performance Analysis and Study of Various Parameters Affecting it”. Proceedings, International Conference on Recent Advances in Mechanical Engineering (ICRAME-2010), Kumaracoil, Tamilnadu, pp.713-716, April, 8-9 2010.
    98. Ankush Gupta, Arpit Saraf, Jitin Luthra, Nitin Gupta and Pradeep Khanna, “Graphical Analysis of an Electropneumatic Fork Feeder”. Proceedings, 10th National Conference on Industrial Problems on Machines and Mechanisms (IPRoMM, 2010), MNIT, Jaipur, pp. 195-199, December 17-18, 2010.
    99. Aparna Gupta, Arjun Mehra, Neha Khemka and Pradeep Khanna, “Analysis of an External Gate Feeder”. Proceedings, 10th National Conference on Industrial Problems on Machines and Mechanisms (IPRoMM, 2010), MNIT, Jaipur, pp. 201-205, December 17-18, 2010.
    100. Pradeep Khanna, Rishabh Bansal and Swati Goyal, “Rotary Disc Feeder: Its Performance Analysis, Study of various factors affecting it and derivation of Mathematical Formula”. Proceedings, 10th National Conference on Industrial Problems on Machines and Mechanisms (IPRoMM, 2010), MNIT, Jaipur, pp. 207-210, December 17-18, 2010.
    101. Arjun Mehra, Dipika Berry, Manvi Govil and Pradeep Khanna, “Graphical Analysis of a Paddle Wheel Hopper Feeder”. Proceedings, 10th National Conference on Industrial Problems on Machines and Mechanisms (IPRoMM, 2010), MNIT, Jaipur, pp. 217-221, December 17-18, 2010.
    102. Ankush Gupta, Arpit Saraf, Jitin Luthra, Nitin Gupta and Pradeep Khanna, “Performance and Graphical Analysis of a Tumbling Barrel Hopper Feeder”. Proceedings, International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Thapar University, Patiala, Punjab, pp. 109-116, February 24-26, 2011.
    103. Charu Garg, Tanvi Gupta and Pradeep Khanna, “Mathematical Modelling and performance Analysis of a Reciprocating Block Feeder”. Proceedings, International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Thapar University, Patiala, Punjab, pp. 117-123, February 24-26, 2011.
    104. Ankush Gupta, Arpit Saraf, Jitin Luthra, Nitin Gupta and Pradeep Khanna, “Mathematical Modelling and Performance Analysis of an Electro Pneumatic Fork Feeder”. Proceedings, International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Thapar University, Patiala, Punjab, pp. 132-140, February 24-26, 2011.
    105. Astha Kukreja, Abhishek Monga and Pradeep Khanna, “Investigation of Process Capability of a Reaming Operation using Statistical Tools”. Proceedings, 2nd International Conference on Mechanical, Industrial and Manufacturing Techniques (MIMT-2011), Singapore, Vol. 1, pp. 589-593, February 26-28, 2011.
    106. Astha Kukreja, Pankaj Chopra, Akshay Agarwal and Pradeep Khanna, “Statistical Modelling Approach for Optimization of a Stationary Hook Hopper”. Proceedings, 2nd International Conference on Mechanical, Industrial and Manufacturing Techniques (MIMT-2011), Singapore, Vol. 1, pp. 594-598, February 26-28, 2011.
    107. Ankush Gupta, Arpit Saraf, Jitin Luthra, Nitin Gupta and Pradeep Khanna, “Regression Modelling and Analysis of a Tumbling Barrel Hopper Feeder”. Proceedings, International Conference on Emerging Trends in Engineering (ICETE-11), NMAM Institute of Technology, Nitte, Karnataka, pp. 601-606, May 4-5, 2011.
    108. Aparna Gupta, Arjun Mehra, Neha Khemka and Pradeep Khanna, “Graphical Analysis of External Gate Hopper Feeder”. Proceedings, International Conference on Advances in Materials and Manufacturing Technology, Chitkara University, Chandigarh, pp. 41-45, July 20-21, 2011.
    109. Arjun Mehra, Dipika Berry,Manvi Govil and Pradeep Khanna, “Analysis of the Paddle Wheel Hopper Feeder”. Proceedings, International Conference on Advances in Materials and Manufacturing Technology, Chitkara University, Chandigarh, pp. 46-50, July 20-21, 2011.
    110. Arjun Mehra, Manvi Govil, Swati Goyal and Pradeep Khanna, “Automated Parts Inspection System”. International Conference on Advances in Materials and Manufacturing Technology, Chitkara University, Chandigarh, pp. 205-207, July 20-21, 2011.
    111. Sonali Yadav, Arushi Malik and Pradeep Khanna, “Pneumatic Step Feeder: Its Performance Analysis and Study of various Parameters Affecting it”. Proceedings, 2nd National Conference on Recent Advances in Manufacturing (RAM-2011), S.V.NIT, Surat, pp. 57-62, September 15-17, 2011.
    112. Ujjwal Tyagi, Garima Gupta and Pradeep Khanna, “Elevating Step Belt Feeder: Its Performance Analysis and Study of Various Parameters Affecting it”.National Conference on Emerging Trends in Mechanical Engineering (ETME-2012), Technocrats Institute of Technology, Bhopal, pp. 142-144, November29-30, 2012.
    113. Narender Kumar, “Optimization of Cutting Parameters for Chip Tool interface temperature in turning of mild steel using Tagachi Method”. AMEET 2012, KNIT Sultanpur, UP, Paper Id: AMEET 047.
    114. “Optimization of Design Parameters of Lower Suspension Arm using Finite Element Code”, G.D. Gautam, Abhishek Tevatia, and S.K. Srivastava, 2011, International Conference on Nanaotechnology & Biosensors
    115. “Modeling by Curve Fitting using Least Square Piecewise Parametric Spline under Tension” Abhishek Tevatia, and S. Kumar,ETME-2011 Proceedings, IIMT college of Engineering, Greater NOIDA, INDIA, eds., Sandeep Sachan and Hitendra Singh, April 7-8, 2011, pp. 16-20.
    116. Andriya, N., Venkateswara Rao, P., Sudarsan Ghosh., Dry Machining of Ti-6Al-4V using PVD coated TiAlN Tools. Proceedings of the World congress on engineering of The 2012 International Conference of Manufacturing Engineering and Engineering Management (WCE'12, ICMEM), London, U.K., 2012: p. 1492-1497.
    117. Andriya, N., Venkateswara Rao, P., Sudarsan Ghosh., A Critical Review on Tool wear in Titanium Machining. Proceeding of the International Conference on Mechanical Engineering and Mechatronics, Canada, 2012: p.83.1-9.
    118. Andriya, N., Venkateswara Rao, P., Sudarsan Ghosh., Machining Study of Ti-6Al-4V using PVD coated TiAlN inserts. Proceeding of the International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, India, 2012: p. 19-26.
    119. Andriya, N., Venkateswara Rao, P., Sudarsan Ghosh., Study on Cutting Forces and Surface Finish in Cryogenic machining of Ti-6Al-4V using PVD coated TiAlN inserts. Proceeding of the International Conference on Advances in Materials Processing and Charecterisation, India, 2013: p. 877-884.
    120. Bishoy, B., Narasimhulu. Andriya, Rao, P. V., Ghosh. S., Improvement of Machining Characteristics of Titanium Alloy with Modified cutting tool inserts under wet condition. Proceeding of the 4th International and 25th All India Manufacturing Technology, Design and Research Conference (AIMTD 2012), India, 2012: p. 717-722.
        ∗ Monographs ∗ Chapters in Books -
    1. Pramendra Kumar Bajpai, Dixit Garg “Total Quality Management in Technical Education”. Chapter contributed in the book “Recent Trends in Technical Education” published by McMillan India under the banner of Indian Society for Technical Education, New Delhi.
    2. Inderdeep Singh, Pramendra Kumar Bajpai “Machining Behaviour of Green Composites: A Comparison with Conventional Composites” to be included in the book “Green Composites from Natural Resources” being published by U.S. publisher Taylor & Francis Group, LLC-U.S.A.
    3. Inderdeep Singh, Pramendra Kumar Bajpai, Vikas Dhawan, “Primary and Secondary Processing of Bio-Composites” to be included in the book “Biomass based Bio-composites” being published by the renowned Smithers-Rapra group.
       

    Books with ISBN with details of publishers - 11

    Name of Faculty/Author

    Title of Book with ISBN

    Publisher
    Mr. D. K. Singh Fundamentals of Manufacturing Engineering; ISBN:14-2007-047-9 CRC Press USA (Taylor & Francis), 2008; Co-pulished by ANE Books INDIA, New Delhi, 2008, 2009, 2011, 2013
    Mr. D. K. Singh Strength of Materials; ISBN:14-2006-916-0 CRC Press USA (Taylor & Francis), 2008; Co-published by ANE Books INDIA, New Delhi, 2007, 2009, 2013
    Mr. D. K. Singh Mechanics of Solids: Theory & Problems; ISBN: 81-7808-584-4 Pearson Education, Singapore, 2002
    Mr. D. K. Singh Manufacturing Technology: Theory & Problems; ISBN: 81-297-0445-5 Pearson Education, Singapore, 2004
    Mr. D. K. Singh Just in Time: Concepts & Practices ISBN: 81-8052-139-7 ANE Books Pvt. Ltd., New Delhi, 2009
    Mr. D. K. Singh Strengths of Materials: Problems & Solutions; ISBN:978-93-8061-874-6 ANE Books Pvt. Ltd., New Delhi, 2011
    Mr. D. K. Singh Manufacturing Technology: Theory & Problems, 2nd Edition ISBN: 978-81-317-2227-5 Pearson Education, Singapore, 2009
    Mr. D. K. Singh Multiple Choice Questions in Mechanical Engineering ISBN: 978-93-81162-69-9 ANE Books Pvt. Ltd., New Delhi, 2012
    Mr. D. K. Singh Manufacturing Technology ISBN: 978-93-8116-238-5 ANE Books Pvt. Ltd., New Delhi, 2012
    Mr. D. K. Singh Elements of Mechanical Engineering ISBN: 978-93-8116-237-8 ANE Books Pvt. Ltd., New Delhi, 2012
    Mr. D. K. Singh Quality Control ISBN: 81-7515-362-8 Galgotia Publications Pvt. Ltd., New Delhi, 2001